Koi-Kote Application tips (Clear)
Typical working life - once the two parts
are mixed together you will have a maximum of 30 minutes to use
the product (at
10 -15 °C).
is a chemically cured coating and its working life decreases the
warmer the temperature (and vice versa), it is therefore advisable
to keep it out of direct sunlight and use as quickly as possible.
bulk the material generates heat so putting it into a paint tray
for roller application will increase its longevity.
mixing will also introduce unnecessary heat and thus reduce the
workable life of the material.
Recommended application tools are available from us (see
mixed, divide the material into two or more containers and get some
help to put it on.
NOT SPLIT PACKS OR TRY TO THIN THE MATERIAL as this will result
in the coating being insufficiently cured.
is a high specification solvent free epoxy coating, which is also
used in drinking water storage tanks, it is not a simple paint and
thus you will need to assess your particular project before mixing
between coats - If you are to exceed more than 72 hours between
coats (at 10°C), it is recommended that you lightly abrade the
previous coat using a 40 grit sandpaper.
This will ensure that, as well as providing a key for the next coat,
it will also remove insects that may have landed and any other high
is good practice, however that if the coating is hard enough to
lightly abrade, then this will ensure the best possible surface
for the final coat to be applied to.
in doubt please call 01892 871 638